Laboratory Products
Achieving low blank levels in trace metal determination ensuring consistency in sample preparation
Nov 06 2024
The implementation of an automated reagent dosing system can effectively overcome safety concerns and ensures consistency of result in sample preparation workflow for trace metal determination.
Reducing detection limits presents some challenges and laboratories need to have specific protocols and the right set-up to control possible contamination and ensure a robust approach. Among other parameters, the handling of the reagents, even if ultrapure, is a key factor in achieving lower detection limits and ensuring reliable quantification limits. Certainly, the quality of the acid plays a key role, but if not combined with proper handling, the reagent can easily be contaminated, affecting the blank values.
Any sample preparation for elemental analysis requires the addition of reagents. When working at trace levels, the choice falls on ultrapure acids.
However, the presence of the analysts in routine operations could contaminate the acid and the sample, as well as could lead to inconsistent results. In fact, human skin, hair and sweat contain contaminants such as Zn, Cd, Pb, Fe, Cu, Ni, Mn and Na. In addition, the use of cosmetics and the presence of watches, rings, bracelets, etc. further increases the risk of contamination during handling. Even the routine use of pipettes can be a source of contamination when working at trace levels, either due to the presence of metal components in the pipettes or simply due to contamination on the tips.
On top of this, there is human error. As reported by Rodushkin Et. Al,2 the level of contaminants could raises from 5 to 35 times, moving from 74 ng/L to 368 – 2,627 ng/L. Those data demonstrate how easily a bottle of reagent lose its purity and gets contaminated in regular operations.
The easyFILL is an automated dosing station specifically design to be integrated into the sample preparation process. In fact, it enables direct addition of concentrated acid in most digestion vessels and vials, without exposing the operator to the reagents. Through a dedicated user interface, the technician simply selects the type and volume of acids and then the system begins the addition. easyFILL is equipped with 6 lines for different reagents that through a peristaltic pump are directly loaded into digestion vessels and vials. For routine operations, the user has only to select a method and press “Start” to begin with the addition. Operator can create customized methods by choosing the volume of reagents, the type of reagents and even selecting a different chemistry for each position.
Digital Edition
LMUK 49.7 Nov 2024
November 2024
News - Research & Events News - News & Views Articles - They’re burning the labs... Spotlight Features - Incubators, Freezers & Cooling Equipment - Pumps, Valves & Liquid Hand...
View all digital editions
Events
Nov 11 2024 Dusseldorf, Germany
Nov 12 2024 Cologne, Germany
Nov 12 2024 Tel Aviv, Israel
Nov 18 2024 Shanghai, China
Nov 20 2024 Karachi, Pakistan