Fast pre- and fine grinding in one instrument

The new high-tech standard for Variable Speed Rotor Mills. The extra powerful FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 premium line offers impact, shearing and cutting comminution in one instrument for fast size-reduction of soft to medium-hard, brittle, fibrous materials and temperature-sensitive samples. This Ultra Centrifugal Mill enables exceptionally quiet grinding with highest rotational speeds up to 22,000 rpm and an extremely fast sample throughput of up to 15 litres and more per hour.

See for yourself how the NEW Variable Speed Rotor Mill PULVERISETTE 14 premium line can facilitate your daily work.

Overview of the premium features:

• Powerful grinding with 22,000 rpm for particularly fast sample throughput
• Max. feed size < 15 mm, sample throughput of up to 15 l/h and more
• AutoLOCK grinding chamber for particularly safe work
• Final fineness down to d₅₀ < 40 μm, sieve rings 0.08 – 6 mm
• Particularly good cooling of the grinding material
• Pleasantly quiet operation
• Very easy to clean due to Clean Design

FRITSCH premium advantage: Especially powerful
A high-speed motor with ceramic bearings ensures a particularly high impact and rotor speed with an extra powerful 22,000 rpm.
Your advantage: finer results in shorter times.

FRITSCH premium advantage: Significantly better cooling
The new PULVERISETTE 14 premium line cools your sample during grinding significantly better than comparable instruments.
Your advantage: melting or sticking of the grinding material is greatly reduced, even with temperature-sensitive sample.

FRITSCH premium advantage: Incredibly safe operation
The new AutoLOCK grinding chamber facilitates automatic opening and closing with clamping and crushing protection. The additional Intelligence-Safety-Control-System only allows the instrument to start if the grinding set is fully and correctly inserted.

FRITSCH premium advantage: Fast, residue-free cleaning
The well-conceived Clean Design covers all the areas, which make the cleaning of your mill as easy as possible: All the surfaces are designed to be extremely dirt-resistant and easy to clean. And all the parts that need regular cleaning can be removed with a single motion without tools. Even the lid of the instrument can be easily removed for cleaning.

FRITSCH premium advantage: two instruments in one
Turn your Variable Speed Rotor Mill PULVERISETTE 14 premium line into a Cutting Mill with just a few simple motions for fast, efficient pre-grinding of fibrous materials and plastics – in an optimised mode with up to 10,000 rpm. Absolutely multifunctional with the choice of grinding with an impact or cutting rotor.

Test the FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 premium line.

Send us your most difficult sample – we will carry out a complimentary sample grinding for you. Compare for yourself.

Up-dated information on the whole FRITSCH range for efficient sample preparation with videos here.