• How to Clean Glassware in the Lab

Glassware

How to Clean Glassware in the Lab

From flasks and beakers to test tubes and pipettes, glassware is a staple in most scientific laboratories. Purpose-built to cope with the demands of scientific research and experiments, lab glassware boasts exceptional strength, clarity, thermal stability and resistance to toxins, chemicals and corrosive substances.

In most cases, cleaning laboratory glassware calls for a specialised approach. This not only protects laboratory personnel but helps to improve the accuracy of results, avoid cross-contamination and extend the longevity of glassware.  

Different glassware types generally demand different cleaning methods. However, the tips below can be applied to most glassware in the lab.

Use the right solvent

Selecting the right solvent is an important part of the glassware cleaning process. The type of solvent used will depend on the materials the glassware was used to store or transport. For example, solvents such as acetone or ethanol should be used to remove organic matter from glassware. Acid solutions such as hydrochloric acid blended with nitric acid are best for glassware being used for chemical reaction testing. Chromic acid cleaning solutions are useful for removing glassware that’s become cloudy or caked with organic matter.

Clean ASAP

Ideally, glassware should be cleaned as soon as it’s no longer being used. This prevents the formation of solid residues that can be difficult to remove.

Invest in autoclaves

Autoclaves take the hassle out of cleaning glassware with a high-pressure steam system that kills bacteria, viruses, spores and other microorganisms. Guidelines published by Princeton University in New Jersey stress that to effectively kill contaminants, “the autoclave must reach and maintain a temperature of 121° C for at least 30 minutes by using saturated steam under at least 15 psi of pressure.” Depending on the volume and contents of the load, cycle time may need to be increased.

Pre sterilise when necessary

Laboratories handling potentially harmful specimens such as spore-bearing bacteria, viruses and blood should sterilise glassware before cleaning. Autoclaves are generally an easy and effective solution. Glassware can also be sterilised using a steam oven or by boiling in detergent for 30 minutes.  

Rinse in deionised water

Many laboratory glassware cleaning guidelines call for deionised water rinses. Also called DI water, this form of H2O is purified to remove minerals such as potassium and sodium. Rinsing glassware with deionised water offers two major benefits. First, the purity of the water makes it more efficient at attracting contaminants. This results in a more thorough clean. Secondly, deionised water doesn’t leave a residue on glassware. This reduces the risk of glassware taking on contaminants, which could compromise the accuracy of future experiments.

Find out more about best-practice laboratory cleaning methods, including tips on how to clean hot plates, mortar and pestles and surfaces in ‘Laboratory Hygiene - A Comprehensive Guide’.


Digital Edition

Lab Asia 31.6 Dec 2024

December 2024

Chromatography Articles - Sustainable chromatography: Embracing software for greener methods Mass Spectrometry & Spectroscopy Articles - Solving industry challenges for phosphorus containi...

View all digital editions

Events

Smart Factory Expo 2025

Jan 22 2025 Tokyo, Japan

Instrumentation Live

Jan 22 2025 Birmingham, UK

SLAS 2025

Jan 25 2025 San Diego, CA, USA

Arab Health

Jan 27 2025 Dubai, UAE

Nano Tech 2025

Jan 29 2025 Tokyo, Japan

View all events